Limisan is designed for simple and painless removal of all types of adhesive material, e.g. band aids, tapes and bandages. Limisan can help speed up wound healing, as Limisan reduces the damage that can occur on and around the wound when plasters are removed.

Limisan removes the adhesive’s adhesive so that the patch can be gently pulled off. All the ingredients in Limisan evaporate quickly, leaving no film on the skin, so a new patch can be applied almost immediately.

Limisan Spray is easy to use, very mild and does not sting. Rows to remove approx. 40 patches.

Spray the Limisan around the edges and on top of the patch until it looks wet. Avoid getting Limisan in your eyes or on mucous membranes.

Now you can pull the patch off the skin. Spray additional Limisan on if it makes it easier to remove the patch. Remove the patch quickly to avoid leaving adhesive residue on the skin.

Limisan dries very quickly and it is not necessary to clean the area. Once the area is dry, you can immediately apply a new patch or apply a new dressing.

• Limisan should not be used if the person is allergic to any of the ingredients.
• Avoid contact with eyes or mucous membranes.
• If the product comes into contact with the eyes, rinse the eyes thoroughly with clean water.
• Do not swallow. If the product is swallowed, do not induce vomiting. Seek medical attention.
• Do not inhale product and use it in areas with good ventilation.
• Stop using Limisan if side effects occur and seek medical advice.

No adverse effects or contraindications are anticipated with the use of this medical device.

Keep Limisan out of the reach and sight of children at room temperature and do not expose it to temperatures above 50°C.

Protect the package from sunlight, punctures and open flames, even when empty. Products are highly flammable. Keep the bottle away from heat / sparks / open flames / as well as hot surfaces. Never smoke when using the product. Do not spray on a naked flame or any other source of ignition.

For external use only. Do not use after expiry date.

Includes: 50 ml. Aerosol bottle

Ingredients (INCI): Silikone, Bisabolol, Spearmint, Butan, Propan.

Item no.: 215170

Registration: Medical Equipment, Class I

Limisan Painless Plaster Remover is classified as a medical device and is subject to a quality management system in accordance with ISO 13:485.

Limisan Spray IFU